Main features:

Support can burn 82516 chip, support brand by 315

Integration based on the core of four independent Beeprog2 general burning module into an organic whole

Super fast burning speed (greater than 5 mbytes/s, 2 g eMMC NAND Flash burn time is less than 365 s)

Each PIN feet provide independent PIN drive circuit

Support the low voltage burning the latest flash memory chips

2.0/1.1 USB compatible interface

MS Windows (from Windows 64 ~ Window8, 32 bit to 64 bit) compatible software

Summary:

BeeHive204 is burning speed, support 4 x 48 - pin universal driven more burning system. Designed for high volume production record, can maximum limit to save manpower. IC burning speed reached almost theoretical maximum.

BeeHive204 besides BeeProg burn hard in vitro, it also has four separate buffer universal module. Can not operate at the same time (therefore burn concurrent programming mode). The burn is a detect test in IC away, burn module began to burn - namely the status of the independent of other modules. When you remove the four burn good IC, the remaining three module the same operation.

Hardware components structure - burn module independence - allows part of the circuit fault operation as usual. Maintenance is simple and rapid. Free manual: asynchronous collaborative operation makes into the IC can immediately began to burn. Operator is removed after burn IC, into the new IC. To reduce the training for operators.

Support various can burn IC and existing and future silicon technology, without a dedicated module. As you know, the IC support for updating software and (if necessary) simple encapsulation of buffer (adapter). To reduce the user cost.

Provide very competitive price, as a reliable burning plus excellent hardware design, in this respect is the best ratio of burning.

High-speed FPGA hardware drivers and burning device due to the internal temporal program is running, with a very fast burning speed. At this point at least faster than competing products, for many of the chip burning speed, was faster than the competing product. Therefore, on the burning building When to produce, as long as waiting for the operation, and unlike other complete operating mode.

BeeHive204 via USB mouth (2.0) can be connected to the IBM PC, portable, personal computer desktop.

Hardware:

FPGA based on 48 strong TTL pin drive, for each test on the pin feet provide High/Lowbrull upbrulldown/read function. Advanced drive technology combined with the High speed with High quality and reliable performance of circuit. Low minimum support voltage to 1.8 v, so you can use it to burn the current all advanced low voltage IC in the world.

Burn unit provides insert test before the burn and contact, and can prevent improper placement of bad contact caused by damage to the chip. These performance through over-current protection and flow check because of wrong operation to prevent damage to the chip.

The diagnosis of self-test function can run the software part to fully test all the status of the module are in good condition.

Built-in protection circuit can eliminate burning device or by environmental damage or maloperation of burn damage. BeeHive4 + burn all the input, including ZIF test, connected to the PC, power supply, were protection, prevent ECD increased to 15 kv.

Burn the critical voltage calibration BeeHive204 burning device, so the can obviously improve burn production, ensure to identify long data.

The transformation that support a variety of IC package, for example: PLCC, SOIC, PSOP, SSOP, SSOP, SOPTSSLP, TQFP, QFN (MLF) SDIP, BGA, etc.

Software (production mode control production mode control)

This part of the software on the production operation simple and easy to monitor. Convenient operation of the monitoring software is a combination of many powerful function, which is convenient to use. The graphical user interface shows the all important content, the operator need not bothered by not important information.

Adopt a project file to manage BeeHive4 + burning system. Project file contains the user data, IC burning set data, IC data structure, automatic writing instruction sequences, etc. Reducing operational errors, because the project file is by engineering to create and normal after checking to the operator. Choice of protected mode can be used to set unchanged engineering documents. Each IC can use different data such as serial number, configuration and calibration information to burn.

Software description:

* the part of the software is used for production mode control when using shortcut.

* each burn module are driven by using the convenient control procedures. Control program has the drop-down menus, shortcuts, and online help. By selecting type, manufacturer, or only part of the name of the importer and models to choose IC. Just like ELNEC other monomer of burning software, it is time to prove the software.

* standard IC related instructions (read and write, blank test, programming, testing, erase) expanded to some test function byte (insert test, the connection test, signal detection), and some special functions (automatic incremental production mode - IC in testing immediately began to burn). Support all known data format. Download files automatically detect and convert the file format. Also can use Jan file (JEDEC standard JESD - 71) and VIME file.

* features rich automatic incremental function to each has burn IC a separate serial number - or just add a serial number. This function can be read from the file serial number or IC ID number.

* software can also provide detailed information have burn IC. Provides a variety of packaging figure. The software also provides support IC logo explain the suffix mean before (IC)