1) According to the wiring diagram, the six cable or test the burner plate welding is good, not short-circuit, not Weld. Good recovery burner assembly.
　　2) Download the file to burn inside the burner.
　　3) The burner / test board placed into two corresponding positions MLK-0211X Series machine on, if not solid, fixed with adhesive tape.
　　4) The writer / test board interface cable, according to the right, under the provisions were left with the machine connected.
　　5) Turn the two burner / test board power supply.
　　6) power-MLK-0211X series of machines.
　　7) Adjust the operating parameters of the machine.
　　8) Before beginning to burn, and the upper feed zone to tie it down horizontally outward, into the six-transistor chip to be processed, note the direction of the chip. The discharge cutting zone plugged six tubes OK, if necessary replace an NG tube. Then press the "S1 / set" button to start the official batch job.
　　 9) work process, and appear on the LCD screen to display the Chinese way out, such as changing tubes, cards and other materials. Appropriate treatment based on tips.
　　10) Do not pay particular attention to the entire working environment beyond the allowable range, the power supply system must be stable, to avoid too many long-term acceptance of strong electromagnetic interference and sunlight, otherwise it will reduce the yield.